Static Transfer Switch Solutions | PowerSelect STS

Continuous Duty STS Solutions

The PowerSelect STS is cutting edge static transfer system from TSINE Electronics which ensure high level of power availability when the main source becomes unavailable. Static transfer switches by TSINE is DSP microprocessor controlled, when the power outage occurs or when the power is not within the predefined range in terms or voltage and frequency, The PowerSelect STS system, AC/AC Solid State transfer device, smoothly transfer power between two or more inputs using SCR or IGBT Technology seamlessly in less than 5 milliseconds which is a quarter of a period to the load.

Thus leads enhancing resilience and prevention fault propagation.

The PowerSelect STS also provides manual transfer via maintenance bypass switch.
The PowerSelect STS presents ultimate performance, highest availability, maximum robustness & versatility.

TSINE Electronics Industries is the center of design in power electronics in Turkiye & powering a vast range of businesses worldwide.

Main Features

SCR (Thyristor) or IGBT Design

DSP Controlled

Maintenance Bypass

Two or More Sources Design

Fail-Safe, Maximized MTBF

PowerSelect Static Transfer Switch, STS, Single Phase STS, 3 Phase STS, 16 A and 32 A, from 32 to 100 A, from 100 A to 1600A, from 1600A to 5000A

Best Suited for

Data centers
Intensive care units in Hospitals
Operation Theatres in Hospital
Signalling & communications for Metro Rails, railways
Critical IT operations
E-commerce businesses
Telecommunication centres
Network operations centres
Optic Fibre nerve centre
Process control
Airport security, air traffic centre system
Commercial buildings
Power generation plants
Power quality and industrial parks
Automated manufacturing
R&D labs
Semiconductor industry

Product Snapshot

Features & Benefits

Technical Specifications

Documents & Downloads

Product Snapshot

Features & Benefits

Technical Specifications


UPS Rating [Unity Power Factor, kVA=kW, pf.: 1]							Efficiency Levels
Rated Power [kVA]	Available in 25 kVA – 1800 kVA						AC~AC Mode, On-line	Up To 97% at 100% Rated Load, 95.5% at 50% Rated Load
Power Cabinets [kVA]	150	250	500	180	300	600	Eco Mode	> 99%
Power Modules [kVA]	25 kVA/ 25 kW; P.f. 1 & 30 kVA/ 30 kW; P.f. 1						Battery Mode	> 96%

System Controller & User Interface							Input Characteristics
Display Type	10.4” Touch Colour LCD, LED System Status Indicators & Keyboard						Rated Voltage & Range	380/ 400/ 415 VAC 3P+N+G -24%~20% 304~478Vac full load; 228V~304Vac, within these tolerances,
Fail-Safe Design	In the event of a power module failure, the system will continue to operate uninterrupted.						Rated Voltage & Range	the output load shall decrease l nearly as per the minimum utility voltage.
	Each power module has its own redundant controlled and static bypass,						Rated Frequency & Range	50/ 60 Hz, 40 ~ 70 Hz
	Zero interruption to the load.						Power Factor	≥ 0,99 Active Power Factor Correction Circuitry
Available Languages	5 Standard – EN-TR-SP-FR-RU						Current Distortion [THDi]	< 3% @ Full Linear Load
Power Analyser	kVA, kW, PF Info						Power Walk-In	Between 1-30 seconds, with 1 s intervals
Real Time Clock	Standard with Dynamic Estimation of Back Up Period
Event Log	500 Events with Details & Info, Downloadable via USB-Ethernet						Battery \| Back Up Power
Smart Event Notification & Scheduled Shutdown for Servers	Controlled Shutdown. Alerts sent directly to email in the event of a malfunction (Standard						Rated Voltage [DC]	±240VDC, 32 to 44 * 12VDC (Adjustable) VRLA AGM Sealed Lead Acid, Ge
	up to 10 users) Text message alerts sent directly to the user in the event of a malfunction (Optional)						DC Input Range	Final Discharge Voltage can be 1.65Vdc or 1.7Vdc
	Scheduled Automatic Shutdown of Servers on Battery Mode (Standard)						Ai-BM	Manual & Scheduled Battery Test, Scheduled Automatic Shutdown of Servers on Battery Mode,
On-Screen Parameters	Load Bar-Graph, 3 Phase Voltages & Currents & Frequencies, Battery Voltage, Status Info for						Ai-BM	(Optional) Real Time Dynamic Remaining Back Up Calculation,
On-Screen Parameters	Each Power Module, Static Bypass Module Parameters & Status Info, Battery Temperature						Modular Hot-Swap Battery	Optional
Alarms	AC Failure, DC Failure, UPS Module(s) Failure, Bypass Mode, Battery Test Failure, Over Temperature,						Charging Capacity	6A for Each 20 kVA Module, 9A for Each 30 kVA Module
Alarms	Overload Operation, More Than 60 Other Alarms Listed in User Manual, Audible Alarms						Operating Temperature	25ºC, Temperature Compensated 4 Stage Charging
	SNMP-Remote Montoring (MS Windows), TCP/IP, Monitoring Over Web Browser, Hot swappable
Connectivity	smart slot card, RJ -45 interface port, USB, RS232, RS485, MODBUS, Optional GPRS/SMS Wireless,						Output Characteristics
	Programmable Dry Contacts						Rated Voltage & Accuracy	380/ 400/ 415 VAC 3P+N ± 1% for Static Load, for Dynamic Load (Step Load) : ± 5%
Communication with Power Modules	Serial, Isolated						Rated f. & Accuracy	50/ 60 Hz (Selectable), ±1% ( Synchronized to Mains, Adjustable up to ±5%),
Dry Contacts	3 Programmable Dry Contacts for Input, 11 pcs Parameters, 4 Programmable Dry Contacts for						Rated f. & Accuracy	±0,1% ( Free Running Mode, Selectable)
	Output, 15 pcs Parameters, 19 Dry Contacts, EPO Outputs in Total						WaveForm	Pure Sine Wave – Sinusoidal
							Voltage Distortion [THDv]	< 1% (Linear Load), < 4% (Non-Linear Load) according to IEC/EN62040-3
General Characteristics							Crest Factor	3:1
MTBF/ MTTR	Over 600000 Hours						Unbalanced Load & Acceptable Load PF	Compatible with Operation on 100% Unbalanced Load 0.3 to 1
UPS Type & Technology	VFI-SS-111 \| Online Double Conversion, Three Level Technology						Overload Operation	60 minutes @ 110% Rated Load, 10 minutes @ 125% Rated Load 1 minutes @ 150% Rated Load
UPS Type & Technology	DSP Microprocessor Controlled, Hot-Swap Modular Architecture						Overload Operation	Switches to Bypass over 150% Rated Load
Isolation Transformer	STANDARD For Flex-T Series
62040-3	COMPATIBLE						Ambient Characteristics
Power Factor	0,9 or 1 kVA=kW Unity Power Factor						Ambient Temperature	OPERATING TEMPERATURE RANGE -10ºC – 40ºC
True Redundancy	N+X, N+1 Redundancy, True Modular UPS Topology							RECOMMENDED OPERATING TEMPERATURE 15ºC – 25ºC
Parallel Configuration [N+1]	Up to 3 Power Cabinets and 1800 Kw							STORAGE TEMPERATURE -30ºC ~ 70ºC
	Input Power Limiting, Phase Reversal, Power Module Over Temperature, Over Current,						Altitute/ Relative Humidity	< 1000m above sea level without derating of output power,
Standard Protection Features	High Temperature Alert, Smart Short Circuit, Regenerative Load, Current Limiting, Charging Current						Altitute/ Relative Humidity	output power is derated 1% per 100m from 1000 to 2000m
	Limiting, Temperature Compensated Charging, Emergency Power Off (EPO).						Noise	< 65dB @ 100% load, 62dB @ 45% load
Operating Conditions	20 ºC, <2400m Above Sea Level, <45% to 55% RH for Best Performance
Cooling/ Isolation	Forced Air Cooling via Redundant Fans – Smart Fan Speed						Standards & Certifications
Ma ntenance Bypass	STANDARD						Safety	EN 62040-1, EN60950, CE Mark
Material [Casing]/ Colour	RAL 7021, BLACK						EMC	EN 62040-2 Class C2, CE Mark – Electro-magnetic Compability
Cable Entry	REAR/ FRONT BOTTOM						Performance	EN 62040-3 (VFI-SS111), CE Mark
Operation Modes	Normal Mode: The input rectifier & output inverter operates in an on-line status to continuously supply power to the critical load.						Quality Management	ISO 9001:2015, TUV, CE Mark
	Battery Mode: Upon failure of the AC input source, the critical load is being continued to be supplied by the inverter, which derives its power from the battery system without any interruption.
	Recharge: Upon restoration of the AC input source, the UPS simultaneously recharges the battery and provides regulated power to the critical load.						Optional Features & Accessories
	Static Bypass: The static bypass shall be used to provide transfer of critical load from the Inverter output to the bypass source.						Parallel Redundancy	Horizantal Power Scaling, Optional
	Internal Manual/ Mechanical Bypass: The UPS is equipped with an internal, make before break, bypass switch.						Hot-Swappable Battery	Optional
							Extended Runtime	Optional
							M. Bypass Cab net	Optional
							Custom Input Voltage	Optional
							IP Classified Enclosure	Standard IP21, Optional up to IP 66

Documents & Downloads

Description

Online, three level, highly-efficient design, efficiency is up to 94.5%

True discrete architecture for power modules

Superior MTBF & MTTR values, maximum availability and uptime for the systems & loads connected to the ups, great serviceability.

Built-in isolation transformer, more electrical & mechanical robustness.

Intelligent battery management, extended battery lifetime, flexible DC bus.

Robust & reliable operation at very high temperatures, harshest environments, challenging environments and loads

True and dynamic R&D, custom designs and device variations for the applications & systems in the field.

Robust & reliable operation at very high temperatures, harshest environments, challenging environments and loads

Superior connectivity standards, LCD display, user & service friendly LCD navigation and menus.

PowerSelect STS Static Transfer Switch Solutions Datasheet 1

Download

Static Transfer Switches by TSINE

PowerSelect STS, 200-2000 A

Download

High current static transfer switches by TSINE

Contact

Critical Power

Power Conditioning

Industrial Rectifiers

Application Special Power Conversion Systems

Containerized Solutions

Transformers

Marine & Maritime

Railways

Aviation Power

Static Transfer Switches

Oil & Gas Industries

Load Banks

Lithium UPS Solutions

Containerized
Solutions

About TSINE

Mission & Vision

Global Presence

Careers

Static Transfer Switch Solutions | PowerSelect STS

Description

PowerSelect STS Static Transfer Switch Solutions Datasheet 1

PowerSelect STS, 200-2000 A